Welcome Guest:
Login or Register

Release Arm Pivots

Replace your GM bellhousing clutch release arm pivot with either the original style, or an adjustable version.

Product & Features

GM Factory Version

Block_15592268

Adjustable Version

This adjustable release arm pivot is our recommendation. It gives height variability, allows more distance from the rear of the release arm to bellhousing window for greater articulation and reduced strain on the bellhousing boot.

Block_3855G

GM_vs_Adjustable_Pivot_Comparo

The adjustable pivot provides almost 3/8" more height than the factory pivot.

Applications & Compatibility

Most GM bellhousings requiring a release arm pivot.

Related Products

While sometimes not needed in this application, it is priceless when clearances dictate its use. With all the variabilities in flywheel and clutch height, we highly recommend its use. Further information is here.

Block_TB1

Chevrolet pattern, Gen I & II small 4 ­11/16” bore


Chevrolet pattern, Gen I & II large 5­ 1/8” bore


Chevrolet pattern, Gen III & IV small 4 ­11/16” bore


Chevrolet pattern, Gen III & IV large 5 ­1/8” bore


Block_HCRC-34

Installation Requirements

Installation is the same as a stock part. The adjustable version requires setting the height and locking position. 

clutch_kitWe strongly recommend that the installer read our Guide to Clutches, Linkages & Bellhousings, to best understand the above arms and the clutch system, generally. Throws and clearances are discussed there and adherence to those methods will yield a successful installation.

Also See